Fortasa's Industrial CompactFlash provides the most reliable and high performance non-volatile storage in an industry standard form factor. The CompactFlash card is fully compatible with CF Type I and Type II device.
Unlike an ordinary consumer CompactFlash card, Fortasa's Industrial CompactFlash product provides exact component traceability to ensure that all critical components (such as Flash Controller, NAND Memory Components, PCB, Connector and Firmware) are exactly the same as were qualified by the
customer. Every Fortasa part number is mapped to a unique and specific Bill of Materials (BOM) which is identical for all the product shipments under the same Fortasa part number.
Fortasa's CompactFlash cards provide complete PCMCIA - ATA functionality and compatibility. Fortasa's CompactFlash products are used in variety of applications, including Point of Sale (POS) terminals, telecom, IP-STB, medical instruments, surveillance systems, industrial PCs and handheld devices.
*The actual available memory on the device is less than what is listed on the package. This is due to small discrepancies in file formats and algorithms used by various operating systems. In addition, a portion of memory space is reserved for system files and data sectors for better performance.
- Compliant with CFA 4.1 specifications
- Built-in HW ECC and SMART Functions
- Advanced wear-leveling and Block Management
- Intelligent Power Failure Recovery
- Shock resistance and Anti-vibration
- Low power consumption
| Model |
Industrial CompactFlash Card
|
| Connector |
50-pin
|
| Form Factor |
CompactFlash Type I, 36.4mm (W) x 42.8mm(H) x 3.3mm (T)
|
| Model Number |
CF3
|
CF4
|
CF5
|
CF6
|
| Capacity |
128MB~16GB
|
256MB~16GB
|
128MB~16GB
|
4GB~64GB
|
Sustained Read/Write
Performance(MB/sec) |
Standard: 35/15;
High Speed: 35/25
|
High Speed: 50/21
|
Standard: 29/20
High Speed: 50/30
|
High Speed: 105/105
|
| Transfer Mode |
PIO Mode-6; MW-DMA Mode-4; UDMA Mode-4
|
PIO Mode-6; MW-DMA Mode-4; UDMA Mode-6
|
PIO Mode-6; MW-DMA Mode-4; UDMA Mode-6
|
PIO Mode-6; MW-DMA Mode-6; UDMA Mode-6
|
| ECC Support |
Up to 8 bit correction per 512 bytes (BCH)
|
Up to 8/15 bit correction per 512 bytes (BCH)
|
Up to 24 bit correction per 1024 bytes (BCH)
|
Up to 15 bit correction per 512 bytes (BCH)
|
| Standard Op Temp. (°C) |
0~70
|
0~70
|
0~70
|
0~70
|
| Industrial Op Tem. (°C) |
-40~+85
|
-40~+85
|
-40~+85
|
-40~+85
|
| Storage Temp.(°C) |
-40~+100
|
-40~+100
|
-40~+100
|
-40~+100
|
| Shock |
1500G
|
1500G
|
1500G
|
1500G
|
| Vibration |
15G
|
15G
|
15G
|
15G
|
| Humidity |
5% to 95%
|
5% to 95%
|
5% to 95%
|
5% to 95%
|
| Lower Power Consumption (3.3V/5.0V) |
•Active mode: 80mA/95mA (Typical)
•Sleep mode: 700µA/900µA (Typical)
|
•Active mode:
95mA/90mA (Typical)
•Sleep mode:
200µA/200µA (Typical)
|
•Active mode:
180mA (Typical)
•Sleep mode:
6mA (Typical)
|
•Active mode: 80mA/95mA (Typical)
•Sleep mode: 700µA/900µA (Typical)
|
| Product Type |
Standard (STD), Non-Removable Setting (NR), Non-DMA (ND), Industrial Temp. (I)
|
| Certification |
CE, EN55022, CISPR 22, EN55024, EN6100
FCC, Part 15 Class B, MIL-STD-810F, RoHS
|
|
|
|
Industrial Compact Flash
