Serving the Critical Data Storage Needs
of Industrial and OEM Customers

M.2 PCIe INTERFACE

M.2 PCIe INTERFACE

As a new generation of Solid State Drives based on PCI Express interface bus, Fortasa PCIe M.2 module offers fastest drive throughput with the quality and reliability expected of Fortasa Industrial Grade products.

Technical Specifications

Fortasa PCIe MLC M.2 2280 Rev 1.4 Final Data Sheet

OVERVIEW

Assembled in an industry standard M.2 42mm and 80mm module length, the PCIe M.2 product offers high capacity, greater performance, low power consumptions and extended reliability.

Fortasa's Industrial PCIe M.2 module is manufactured with cost effective SLC NAND Flash, cost effective MLC NAND Flash or the newest 3D TLC NAND Flash components in both Standard (0 to 70°C) and Industrial (-40°C to 85°C) Temperature grades.in both Standard (0°C to 70°C) and Industrial (-40°C to 85°C) Temperature grades. With capacity range from 16GB to 256GB and Read and Write performance of over 750MB/sec. Fortasa's Industrial PCIe M.2 modules can benefit any embedded application where high reliability or extreme environmental conditions are a must.

Fortasa PCIe M.2 products are the perfect solution for your most critical storage needs.

FEATURES

  • Most Common Industry Compliant M.2 Form Factors
  • MLC NAND Memory Based Industrial Modules
  • Standard (0 to 70°C) and Industrial (-40 to +85°C) Temperature Support
  • Advanced Wear-leveling and Block Management
  • Built-in HW ECC, Trim Command and S.M.A.R.T. Functions
  • Power Failure Prevention and Recovery
  • Thermal Sensor for Overheat protection
  • TBW Lifetime Estimate Available for Each model and capacity
  • Quick Erase / Military Data Purge / Write Protection (Optional)
  • AES-256 Encryption, TPG Opal 2.0 (Optional)

SPECIFICATIONS

Model Name M.2 PT60
NAND Flash Type MLC
Interface Type 10Gb/sec, PCI Express Gen 2x2
Connector Type M.2 B & M key
Form Factor M.2
Physical Dimensions (in mm) 60 x 22 x 3.7 (mm)
Capacities 16GB~256GB
Sustained Read/Write Performance 750 / 320
ECC Support Up to 72-bit per 1K bytes BCH ECC
Standard Op Temp.(°C) 0 ~ + 70
Storage Temp.(°C) -40 ~ + 100
Extended Op Temp.(°C) -40~+85
Operating Voltage 3.3 V ± 5%
Shock 50G
Vibration 15G
Humidity 5% ~ 95%
Power Consumption (typ) 1335 mA / 540mA