Serving the Critical Data Storage Needs
of Industrial and OEM Customers

2.5" SATA FLASH DRIVE

2.5" SATA FLASH DRIVE

Fortasa's 2.5" Industrial Serial ATA Flash Drive is the most common Flash Drive form factor in industrial and computing applications. Containing no moving parts, the SAFD Series of Industrial SSDs is specifically designed to be used in most rugged environments where data reliability requirements are significantly greater than that of a consumer product.

Technical Specifications

Fortasa SATA SAFD25N-M MLC Flash Drive rev 2.3 Final.pdf Fortasa SATA SAFD25N2-M MLC Flash Drive rev 1.1 Final.pdf Fortasa SATA SFD25B SLC Flash Drive Rev 1.1 Final.pdf

OVERVIEW

Fortasa's 2.5" Industrial Serial ATA Flash Drive Series offers direct replacement to a conventional 2.5" HDD that is significantly more rugged, reliable and power-efficient. Containing no moving parts, the SAFD Series of Industrial SSDs is specifically designed to be used in rugged environments where data reliability requirements are much higher than that of a consumer product. Potential applications are military devices, thin clients, Point of Sale (POS) terminals, telecom, medical instruments, surveillance systems and industrial PCs. The SAFD Series products offer high capacity, greater performance, low power consumptions and extended reliability.

Fortasa's Industrial SATA Flash SSDs are manufactured with either high reliability SLC NAND Flash, cost effective MLC NAND Flash or the newest 3D TLC NAND Flash components in both Standard (0 to 70°C) and Industrial (-40°C to 85°C) Temperature grades. With capacity range from 8GB to 16TB and Read and Write performance of over 500MB/sec. Fortasa's Industrial SATA SSDs can benefit any industrial application. As an added service, these drives can be reconfigured to offer value added features such as Write Protect, Military Purge, AES-Encryption, Cryptographic Erase, etc.

Offered in an Industry Standard 2.5" full size SSD, Fortasa's SAFD products are the perfect solution for your most critical storage needs.

FEATURES

  • Optimal replacement of 2.5" SATA HDDs upto 16B capacity
  • SLC, MLC or 3D TLC NAND Memory Based Industrial SSDs
  • Standard (0 to 70°C) and Industrial (-40 to +85°C) Temperature Support
  • Advanced Wear-leveling and Block Management
  • Built-in HW ECC, Trim Command and S.M.A.R.T. Functions
  • Power Failure Prevention and Recovery
  • Thermal Sensor for Overheat protection
  • TBW/DWPD Lifetime Estimate Available for Each SSD model and capacity
  • Quick Erase / Military Data Purge / Write Protection (Optional)
  • AES-256 Encryption, TPG Opal 2.0 / CryptoErase (Optional)

SPECIFICATIONS

Model Name SAFD25N-M SAFD25N2-M SFD 25B
Interface Type SATA 3 (6Gb/s)
Connector Type (7+15) pin male
Flash Type MLC MLC SLC
Form Factor 2.5"
Capacities 32GB - 256GB 64GB - 2TB 32GB - 512GB
IOPs (4K Random Write) 79K 80K 90K
Sustained R/W Speed (MB/Sec) 525/455 560/500 520/540
ECC Support 40 bit/ 1Kbytes 120 bit/ 2Kbytes 120 bit/ 2Kbytes
Industrial Op Temp.(°C) -40°C ~+85°C
Optional Features AES-256, TCG OPAL 2.0, WP#, CryptoErase
Standard Op Temp.(°C) 0 ~ + 70°C
Storage Temp.(°C) -40°C ~ + 100°C
Shock 1500G
Vibration 15G
Humidity 5%~95%
Power Consumption (typ) Active: 680mA, Idle: 50mA Active: 800mA, Idle: 85mA Active: 1160mA, Idle: 85mA
MTBF (hours) >1000000 >1000000 >2000000
Dimensions (mm) 100x69.8x6.9 (LxWxH) 100x69.8x6.9 (LxWxH) 100x69.8x9.3 (LxWxH)